RecuBox launches into the market a transport equipment for parcels, RecuBox Sanitary with an innovative one-piece profiling system, more resistant and hygienic, destined for the transport of goods that need more demanding sanitary characteristics.
Formed by panels pressed with an insulating core of extruded polystyrene (XPS), covered by two layers of polyester reinforced with fiberglass which is an ideal material for cleaning and disinfection. It has a pressed floor with a rice grain finish and a polypropylene honeycomb core and a polyester outer layer. The rice grain polyester makes the body floor a rough, non-slip surface, which offers safety against possible falls during the cleaning and disinfection process.
Regarding the coating of the exterior face of the floor, it has a layer of polyester, which is responsible for preventing the adherence of polluting particles, and in turn, allows cleaning it in a simple way.
The polypropylene core is in charge of preventing the appearance of fungi due to humidity such as mold, which is very harmful in materials such as wood. To avoid the creation of these microorganisms, this bodywork has been equipped with 4 LED bulbs, since low light is a factor in creating these.
The entire interior cabin creates a perfectly watertight volume, which has four points for water evacuation. Countersunk push-type drains have been installed to facilitate the entry of transport tools such as forklifts or pallet trucks without obstructing their passage.
This type of Box Body has been designed and developed with a single main sanitary objective, which is why the cabin does not have any type of mechanical fixation such as screws and rivets, and adhesives-sealants are not used. This is due to the fact that they are concentrating sources of impure particles, and their cleaning does not ensure total disinfection. However, thanks to the structural design of the profiles that make up the Box Body, watertightness is ensured.
Cleaning and sanitizing this type of Box body becomes a simple and light activity. This allows cleaning interior in a conventional way and if desired daily, with cleaning systems with water expelled at high pressure, without risk of deterioration of the bodywork.
The use of detergents is highly recommended, as long as their hydrogen potential (pH) exceeds the value 7, a value which is set at the so-called Neutral pH where the cleaning detergent is found. The recommended products, according to the pH scale, are in the range from 7 to 14, both inclusive, where 7 is the neutral value, and 14 is the most alkaline value, where these products exert the function of degreasing or stripping, less aggressive products.
All the most common accessories in the sector Body Builder such as lashing rails or Kick plates, installed inside, have been applied a surface treatment of powder paint to prevent the formation and spread of harmful organic compounds, the most known is rust. In this way, the formation of rust is considerably reduced, and its spread is practically nil.
On the other hand, this, like any of the bodies developed and manufactured by RecuBox, allows the installation of STERILIZATION systems, fixed or portable, according to the client’s needs.
A Box Body, in its basic expression, is nothing more than a three-dimensional geometry that has 6 surfaces and 12 connecting edges.
This section focuses on the study of these connections, which are of vital importance in sectors as important today as healthcare. In this Box body, all the connections between the different elements that make up the box have surface continuity as a criterion, that is, the change of direction in the tangent to the surface is not allowed.
With this criterion, the absence of corners and holes is achieved, which favor the accumulation of dust and dirt.
The exterior finish of the Box Body, in accordance with the interior, does not present fixings such as screws or rivets in
There is also no application of sealing elements, so it can be cleaned in a conventional high pressure and temperature water wash tunnel.
The Box Body has a backside with two vertical doors with a 270º opening that facilitates the loading and unloading of medical merchandise, made up of aluminum profiles and EPDM rubber for greater sealing.
This Box Body has installed all the necessary devices for mandatory compliance with current regulations on lighting in industrial vehicles.
This website uses its own and third-party cookies to collect information that helps optimize your visit to its web pages. Cookies will not be used to collect personal information. You can allow its use or reject it, you can also change its configuration whenever you want. You will find more information in our Cookies Policy. AcceptCloseConfigure Browser